Modelo: NW1000253The high performance waterproofer designed to enhance performance and revitalise the breathability of waterproof clothing. Easy to use in your washing machine or by hand, non flammable and PFAS free.
For waterproofing rain gear.
Features:
- Easy to use wash-in waterproofing for all breathable waterproof clothing
- Adds water repellency, revives breathability and reduces water absorbency without tumble drying
- Enhances the performance of your gear, keeping you warmer and drier
- Recommended for Gore-Tex®, Sympatex®, eVent®, Nikwax Analogy® and all other waterproof fabrics
Why breathability depends upon water repellency…
Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct®.
Waterproof clothing needs to be breathable…
“When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry. The waterproof fabric must allow moisture vapor to pass through it, or ‘breathe’; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation.
Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet. Nikwax TX.Direct® adds Durable Water Repellency (DWR), which prevents water absorption, while maintaining breathability, keeping you dry and comfortable.”
Use Nikwax TX.Direct® when your raingear soaks up water…
Your raingear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Tech Wash®, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct®, after cleaning first with Nikwax Tech Wash®.
Cleaning properly can be as important as waterproofing…
Using the right cleaning product is as important as using the right waterproofing product. Conventional detergents leave behind a thin water-absorbent film on materials, which masks their Durable Water Repellency (DWR). Therefore, always clean your waterproof garments with Nikwax Tech Wash®. Remember that dirt itself works against DWR, so regular cleaning will enhance performance.
How Nikwax TX.Direct® Wash-In protects…
Nikwax TX.Direct® Wash-In is the market leader. It is easy and quick to apply in a washing machine, and its highly Durable Water Repellency (DWR) develops on air drying. The washing machine application ensures that the treatment goes right through the garment, treating seams, tapes and cords, as well as the fabric. Also, as the need for tumble drying is removed, this saves energy and protects more vulnerable, older, garments from heat. Nikwax TX.Direct® Wash-In has been specifically designed and optimized for breathable waterproof garments; it leaves a flexible water repellent treatment on individual fibers allowing moisture vapor to pass through, maintaining breathability.
Impermeabilizante de alto rendimiento diseñado para mejorar el rendimiento y revitalizar la transpirabilidad de la ropa impermeable. Fácil de usar tanto en la lavadora como a mano, no inflamable y sin PFAS.
Para impermeabilizar ropa de lluvia.
Características:
- Impermeabilizante fácil de usar que se aplica durante el lavado, apto para toda la ropa impermeable transpirable
- Aporta repelencia al agua, recupera la transpirabilidad y reduce la absorción de agua sin necesidad de secadora
- Mejora el rendimiento de tu equipación, manteniéndote más abrigado y seco
- Recomendado para Gore-Tex®, Sympatex®, eVent®, Nikwax Analogy® y todos los demás tejidos impermeables
Por qué la transpirabilidad depende de la repelencia al agua…
Las prendas impermeables y transpirables son más propensas a que el interior se empape de sudor y se moje cuando se utilizan en condiciones de humedad o lluvia. Si el tejido exterior absorbe agua, la prenda puede perder hasta un 70 % de su transpirabilidad. Por lo tanto, es imprescindible mantener el tratamiento repelente al agua duradero (DWR) del tejido exterior de tu chaqueta para garantizar la comodidad. Con el tiempo, este tratamiento se desgasta y es necesario renovarlo con Nikwax TX.Direct®.
La ropa impermeable debe ser transpirable…
«Cuando hacemos un esfuerzo físico, sudamos. La evaporación del sudor nos refresca y nos mantiene cómodos. Sin embargo, cuando llueve queremos evitar mojarnos, por lo que nos ponemos ropa exterior impermeable para mantenernos secos. El tejido impermeable debe permitir que el vapor de humedad lo atraviese, es decir, que «respire»; de lo contrario, nuestro sudor no puede evaporarse, lo que provoca que nos sobrecalentemos y nos mojemos por la condensación.
Además, si el tejido exterior de tu prenda absorbe agua y se «empapa», su transpirabilidad se verá reducida, lo que hará que te sientas pegajoso y mojado. Nikwax TX.Direct® aporta una repelencia al agua duradera (DWR), que evita la absorción de agua al tiempo que mantiene la transpirabilidad, manteniéndote seco y cómodo».
Utiliza Nikwax TX.Direct® cuando tu ropa impermeable absorba agua…
Tu ropa impermeable podría estar absorbiendo agua simplemente porque está sucia. En primer lugar, intenta limpiarla con Nikwax Tech Wash®; si es bastante nueva o se le ha renovado recientemente la impermeabilidad, la repelencia duradera al agua (DWR) se reactivará con solo limpiarla. Sin embargo, una vez que la prenda se haya usado mucho, tendrás que aplicar DWR con Nikwax TX.Direct®, tras limpiarla primero con Nikwax Tech Wash®.
Limpiarla correctamente puede ser tan importante como impermeabilizarla…
Utilizar el producto de limpieza adecuado es tan importante como utilizar el producto impermeabilizante adecuado. Los detergentes convencionales dejan una fina película absorbente de agua en los tejidos, lo que anula su repelencia duradera al agua (DWR). Por lo tanto, limpia siempre tus prendas impermeables con Nikwax Tech Wash®. Recuerda que la suciedad en sí misma contrarresta el efecto del DWR, por lo que una limpieza regular mejorará su rendimiento.
Cómo protege Nikwax TX.Direct® Wash-In…
Nikwax TX.Direct® Wash-In es líder del mercado. Es fácil y rápido de aplicar en la lavadora, y su repelencia al agua altamente duradera (DWR) se desarrolla al secarse al aire. La aplicación en la lavadora garantiza que el tratamiento penetre por completo en la prenda, tratando las costuras, las cintas y los cordones, así como el tejido. Además, al eliminar la necesidad de secado en secadora, se ahorra energía y se protegen del calor las prendas más vulnerables y antiguas. Nikwax TX.Direct® Wash-In ha sido diseñado y optimizado específicamente para prendas impermeables transpirables; deja un tratamiento repelente al agua flexible en cada fibra, lo que permite que el vapor de humedad pase a través de ellas, manteniendo la transpirabilidad.