Model: NW1000793
High performance waterproofer designed to revitalize breathability of all combination fabric and leather footwear. Easy to apply by hand, non flammable and PFAS free.
For waterproofing footwear
- Easy to use spray-on waterproofing for all fabric, leather and combination footwear
- Adds water repellency and revives breathability without softening leather
- Enhances the performance of your footwear, keeping your feet warmer and drier
- Recommended for Gore-Tex® and eVent®, BDRY ® and all other waterproof combination footwear
How To Use:
Apply Nikwax Fabric & Leather Proof by hand
IMPORTANT: Shake bottle before use. Always clean first using Nikwax® Footwear Cleaning Gel.
Sponge:
- Protect work surface from potential overrun.
- Dab sponge to release product. Apply to clean, wet footwear.
- After 2 minutes remove excess with a cloth.
- Allow to dry naturally before use.
Spray:
- Protect work surface from potential overspray.
- Apply to clean, wet footwear from a distance of 15cm.
- After 2 minutes remove excess with a cloth.
- Allow to dry naturally before use.
Note: Light/coloured fabric and/or leather may darken after treatment. Test on a hidden area first.
Always allow footwear to dry naturally
Leave footwear to dry at room temperature.
Paper can be stuffed into the toes to absorb excess moisture, this should be replaced when wet.
Keep footwear away from fires and radiators, drying too quickly can crack leather and cause bonded soles to peel.